Eric has been restoring his skatebike. Eric asked me a few questions about mine. I figured others restoring a Minson Skate Bike might find the answers helpful.
The hand brake is one of the unique things about a Minson Skate Bike. To use it looks unusual to say the least. The Skatebike came with the hand brake setup only. My wheel was rusted badly so when I replaced it I bought a 16 inch wheel with a coaster brake. They are by far the easiest ones to find. I often wondered why the bike didn’t come with a coaster brake originally. Then I used it. The problem is the crank arms are short (100 mm). This means to work you end up skidding. I wanted to replace the arms but could not find any that short. There is about 120mm of ground clearance so a slightly longer arm may work. The sprocket is only 36 teeth so the combination of the small sprocket and short arm is hard to find. A slightly longer arm with a smaller sprocket may even work better.